Free Shipping on This item (up to 1Gal)
Athena Bloom is a simple, clean, and cost-effective 2-part liquid formula designed for the flowering stage of growth for fruit and flower-producing plants. We blend top-of-the-line macronutrients and chelated micronutrients to achieve greater uptake across a wider pH range in any combination of water type and growing media.
Our 2-part blended formula should be used in equal amounts during the flowering phase to encourage the rapid onset of bud production, increase flowering sites, and promote high-quality yields.
Formulas are sediment free and are compatible with all dosing and irrigation systems including fine dripper heads. Small amounts of micro-particles are occasionally visible in some conditions but will not affect mineral balance or system compatibility.
Best Practices
| Recipe |
Always use equal parts Athena Bloom A & B. |
| Mixing |
Do not combine fertilizers in concentrate form, always dilute in water. |
| Measuring |
Carefully measure using clean instruments. Never put anything into the bottle. |
| Water |
Use a higher dose in reverse osmosis (RO) water. For well, tap or city water, reduce CaMg to account for existing water content. |
| pH Range |
5.6 - 6.2 |
| pH Adjustment |
Use Athena Balance to buffer water or adjust to desired pH after mixing. |
| Storage |
Store closed in original packaging at a temperature between 7° C and 29° C. |
| Diagnostics |
Extreme heat or cold can affect solubility. If you see crystallization or sediment, shake well to redissolve. If the problem continues, contact Athena Support for a replacement. |
Product Features
Irrigation - Compatible with all dosing and irrigation systems.
Solubility - 100% soluble, no residue, will not clog emitters.
Stability - Once mixed, pH will remain stable in solution.
Filtration - Two-stage filter with 1 micron mesh to remove all particulates and contaminants.
Application Instructions
| Rate |
Choose a feed schedule based on growing media, strain, and environment. |
| Frequency |
Apply with every feeding. |
| Timing |
Best results are seen with more frequent lower volume feedings |
| 1 mL/3.785L = |
0.17 (EC) • 85 (PPM 500) • 120 (PPM 700)
|
Guaranteed Analysis
|
Bloom A |
Bloom B |
| Total Nitrogen (N) |
4% |
0.7% |
| Nitrate Nitrogen |
3.8% |
0.5% |
| Ammoniacal Nitrogen |
0.2% |
0.2% |
| Available Phosphate (P2 O5) |
NA |
6% |
| Soluble Potash (K2 O) |
5% |
5% |
| Calcium (Ca) |
3.2% |
NA |
| Magnesium (Mg) |
0.17% |
0.94% |
| Boron (B) |
0.01% |
NA |
| Iron (Fe) |
0.06% |
NA |
| Manganese (Mn) |
0.013% |
NA |
| Molybdenum (Mo) |
0.0007% |
NA |
| Zinc (Zn) |
0.0045% |
NA |
| Sulfur (S) |
NA |
1.3% |
| Copper (Cu) |
NA |
0.005% |
DERIVED FROM
BLOOM A: Calcium Ammonium Nitrate, Potassium Nitrate,Iron EDTA, Iron EDDHA, Zinc EDTA, Manganese EDTA, Sodium Molybdate, Sodium Borate, Magnesium Nitrate
BLOOM B: Monopotassium Phosphate, Potassium Nitrate, Copper EDTA, Magnesium Sulfate, Monoammonium Phosphate
